Cylinder Head Customization for Motorcycle Performance Optimization

Competition CNC Past Projects

"I brought my 2009 ZX14 to Jim at Competition CNC because I wanted a package that would not only be fast and make some serious power but I needed it to be very reliable. I go on two to three long ride anywhere from 1600 to 300 miles and we can be out in the middle of nowhere. Well with that being said I could not have some finicky bike that can't run in high temps or cold reagons. I've been as far north as Nova Scotia all the wat to Florida and in between. I run track days and LSA Top Speed events and thanks to Jim and his guys I set my all time goal of 203.47 Mph in the 1.5 mile and 199.6 in the mile and on the weekends I even take my wife on this 14 riding all over the place. I would recommend Competition CNC 100% and trust what they are doing......."
Doug Gregory's Gen1 zx14 street bike with the Super sport head and cam package.
Rickey Gadson reaches 217.8 MPH on Competition CNC's Kawasaki ZX-14 at Loring 2010. After completing tech inspection with the bike on Friday we were ready for Saturdays shake down and license runs. The bike was a completely new platform this year having switched from last years Kawasaki zx12r. The zx14 allowed for a larger displacement engine of 1570 cc so we could get closer to the 1650cc class limit.
Rickey Gadson
After the Saturday morning drivers meeting Rickey got his big red "R" rookie sticker for his helmet and we did the mandatory rookie track orientation ride.
rookie sticker
The track is concrete 300 feet wide 8 feet thick and just under 2.5 miles long. Rookies are required to do the licensing runs of 125mph, 150mph and 175mph before an all out pass. We took advantage of the first few passes to make sure there weren't any issues with the bikes brakes and suspension. The first full pass went smooth with a trap speed of 212 mph. The rpm's were quite low in 6th gear, just breaking 10,200. We wanted to gear the bike tall for the first few runs so we could bring the rpm's up as the runs progressed. The bike was setup on the dyno with the air fuel rich and a few degrees of ignition advance removed from optimal for safety which took away a handful of hp and left the bike at 246 hp on the Dynojet 250i.
CNC Porting for Street Bikes
After making another pass at 215mph we decided to change the gearing to pull more rpm's. The next pass was 217 mph and the difficulty of foot shifting a bike at 200+ mph became apparent and it was scrubbing off speed. After making another gearing change and a few more passes we were still at 217 mph. It seemed that was our balance between drag and power. After contemplating running a different fuel for some added power at the end of the day on Sunday we switched fuels and made a pass hoping to get a few more HP to break 220 mph but we ended up hurting the engine.
site3
217.8 mph was our best speed of the Loring event and the fastest speed for a normally aspirated bike. With only about 3 short weeks to get the bike together and limited time to really tune the bike. We feel it there is quite a bit more power left in it and haven't even had the chance to play with cam timing or different cams. Next up is some drag racing...
site4
Sims Motor Sports chooses Competition CNC's Stage 2 Head and cam package for there Suzuki Hayabusa project bike featured in Julys Sport Rider Magazine.
Sims Motor Sports chooses Competition CNC's Stage 2 Head and cam package
Competition CNC's New Cylinder Head and Doug Meyer Help TFA set New Speed Record at Loring Maine TFA arrived Friday at the old Loring SAC Air force base in Limestone Maine for the first of what is hoped to be an annual event by the LTA/ECTA. Friday was reserved for tech inspection with the first runs to start Saturday after the drivers meeting and group drive down the course for familiarization with the layout. It was agreed that everyone would not exceed 175 mph for the first pass at this new venue. The timing lights were set 1.5 miles from the start line so there was a mile of shutdown. READ MORE...
Competition CNC's New Cylinder Head and Doug Meyer
Sims Motorsports Suzuki Hayabusa - Force Majeure

Sims Motorsports Returns With Yet Another Superbly Crafted Monster: A 1510cc Hayabusa That Will Do 213 Mph On Just Motor-On A Warm-Up Run

Instead of the old-style, time-consuming method of hand-porting the cylinder head, Sims turned to Competition CNC in Oakville, Connecticut, to modify his cylinder head ports using a five-axis CNC machine (a method seeing increasing use in production with the OEMs).

Read More

Sims Motorsports Suzuki Hayabusa - Force Majeure
Mike Garcia's uses Competition CNC's Stage 2 CNC ported head and cam package to set the Bonneville Record for 1350cc APS-AG.
Mike Garcia uses Competition CNC's Stage 2 CNC ported head and cam package
"Competition CNC's new SB2.2 cylinder head helps the Luna Sueno Tequila/Chevrolet Corvette to its first SCCA Trans-am win at Watkins Glenn NY."

Read More

Competition CNC's new SB2.2 cylinder head helps the Luna Sueno Tequila/Chevrolet Corvette
Competition CNC's Factory LT-1 heads in GM High -Tech Magazine cylinder head shootout.

Read More

Competition CNC's Factory LT-1 heads in GM High -Tech Magazine cylinder head shootout
"Competition CNC's cnc ported factory ford cast Iron and cnc ported RHS iron SBF ford heads provide plenty of punch for Cobra Automotives race cars to score many wins in the vintage race series ."

Read More

Competition CNC's cnc ported factory ford cast Iron
Easy Engine Shipping by Freight Wire
Click here for easy engine shipping.

Ferrea Valves at Competition CNC Hays Machine Works at Competition CNC Kibblewhite Precision Machining at Competition CNC Marine Crankshaft, Inc at Competition CNC Millennium Technologies Online Store at Competition CNC
APE Race Parts at Competition CNC CP Carillo at Competition CNC Marren Fuel Injection at Competition CNC Web Cam Inc. - Performance and Racing Camshafts at Competition CNC World Wide Bearings at Competition CNC
T H E     R O A D     O R     R A C E T R A C K     I S     W H E R E     T H E     D E S I G N     G E T S     T H E     F I N A L     S E A L     O F     A P P R O V A L !
© 2014-2017 Competition CNC. All Rights Reserved

Site by Gombos Consulting, LLC

facebook